LINKUP AVA5

PCIe 5.0 Riser Cable Compatibility Guide

Select a brand and PC case or mount to find the recommended LINKUP PCIe 5.0 riser cable.

Before You Use the Compatibility Guide

Using a vertical GPU mount?

Please follow the compatibility recommendations for your specific vertical GPU mount rather than those for your PC case.

Please note

While we do our best to provide accurate and helpful compatibility information, we have not physically tested every case and mounting configuration listed in this guide. Fitment and installation requirements may vary depending on your setup.

Help us improve

Have compatibility information or suggestions to share, or spotted something that needs correcting? support@linkup.one. We appreciate your input as we continue improving this guide and making it a more accurate and useful resource for the PC-building community.

Antec 2 models
Cannon 1 recommendation
Performance 1M 1 recommendation
Recommended Riser Cable 24cm Single Reverse Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33VL-024BK-v4

Notes

Install the riser cable with the socket facing downward, then flip the socket upward to install the GPU.
The screw holes may not align with the case. Standoffs may be required. See Installation Photo for reference.
The Installation Photo shows the cable installation method in a Fractal Design Terra case.
ARCTIC 1 model
Xtender VG 1 recommendation
ASUS 4 models
ProArt PA401 1 recommendation
ROG Hyperion GR701 1 recommendation
Recommended Riser Cable 20cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-020BK-v4

Notes

The screw holes may not align with or reach the case mounting holes.
Use standoffs for support, or leave the riser cable unsecured to the case. The built-in GPU lock will keep the cable secured to the GPU, so screws are not required.
ROG Strix Helios 1 recommendation
TUF Gaming GT502 1 recommendation
be quiet! 5 models
Light Base 600 LX 1 recommendation
Light Base 900 FX 1 recommendation
Pure Base 501 LX 1 recommendation
Shadow Base 800 1 recommendation
Silent Base 802 1 recommendation
Cooler Master 4 models
NCORE 100 AIR 1 recommendation
Recommended Riser Cable 30cm Single Reverse PCIe 5.0 Riser Cable
SKU AG-P5-33SV-030BK-v3

Notes

Precise bending is required for a neat installation. See Installation Guide for reference.
NCORE 100 MAX 1 recommendation
Recommended Riser Cable 30cm Single Reverse PCIe 5.0 Riser Cable
SKU AG-P5-33SV-030BK-v3

Notes

The provided Installation Guide is for the Cooler Master NCORE 100 AIR, but the installation method is essentially the same for the NCORE 100 MAX.
Precise bending is required for a neat installation. See Installation Guide for reference.
NR200 1 recommendation
Recommended Riser Cable 6cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-006BK-v4

Notes

The 6cm cable may be slightly long for some configurations and may need to be bent slightly to fit. This is safe and will not affect cable performance.
Vertical Graphics Card Holder Kit v3 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

Only the right screw hole will align with the mounting bracket. One screw is sufficient to secure the cable in place.
Corsair 6 models
3000 series 1 recommendation
4000 series 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

The provided Installation Guide shows the Corsair 3000 Series, but the cable length and installation method are the same for the Corsair 4000 Series. See Installation Guide for reference.
5000 series 1 recommendation
Recommended Riser Cable 20cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-020BK-v4

Notes

The provided Installation Guide shows the Corsair 3000 Series, but the installation method is the same for the Corsair 5000 Series. See Installation Guide for reference.
The only difference is that the recommended cable length for the Corsair 5000 Series is 20cm, compared to 15cm for the Corsair 3000 Series.
6500 series 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

A vertical GPU mounting bracket is required for vertical installation.
7000 series 1 recommendation
9000 series 1 recommendation
Cougar 1 model
FV270 1 recommendation
DAN Cases 1 model
A4-SFX 1 recommendation
DeepCool 1 model
MORPHEUS 1 recommendation
FormD 1 model
T1 (v2.1) 2 recommendations
Fractal Design 9 models
Define 7 XL 1 recommendation
Era 2 1 recommendation
Recommended Riser Cable 24cm Single Reverse Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33VL-024BK-v4

Additional Hardware

2x 10mm M3 hex nut standoffs
2x 10mm M3 screws

Notes

The screw holes will not align. Standoffs, as listed above, are required to support the riser cable.
The original case screws secure the sides of the riser cable PCB rather than passing through its screw holes. See Installation Guide for reference.
Flex 2 Vertical GPU Mount 1 recommendation
Recommended Riser Cable 20cm Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SL-020BK-v4

Notes

The screw holes will not align. Use the bracket's screw holes to secure the sides of the riser cable PCB instead of passing screws through the riser cable's screw holes. See Installation Guide for reference.
Meshify 2/3/C 1 recommendation
Meshify XL Series 1 recommendation
Mood 1 recommendation
Node 202 1 recommendation
Recommended Riser Cable 5cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-005BK-v4
Ridge 1 recommendation
Terra 1 recommendation
Recommended Riser Cable 24cm Single Reverse Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33VL-024BK-v4

Additional Hardware

2x 5mm M3 hex nut standoffs
2x 5mm M3 screws

Notes

The screw holes will not align. Standoffs, as listed above, are required to support the riser cable.
The original case screws secure the sides of the riser cable PCB rather than passing through its screw holes. See Installation Guide for reference.
GAMDIAS 1 model
NESO P1 1 recommendation
HAVN 1 model
HS 420 1 recommendation
Recommended Riser Cable 20cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-020BK-v4

Notes

The screw holes will not align. The riser cable can be secured using standoffs that support the sides of the PCB, or it can be installed without being screwed into the case. The built-in GPU lock will keep the cable secured to the GPU, so screws are not required.
HYTE 2 models
Y60 1 recommendation
Recommended Riser Cable 20cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-020BK-v4

Notes

Only the left screw hole will align with the mounting bracket. One screw is sufficient to secure the cable, thanks to the built-in GPU lock.
The Installation Photo shows the HYTE Y70, but the installation method is the same for the HYTE Y60. See Installation Photo for reference.
Y70 1 recommendation
Recommended Riser Cable 20cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-020BK-v4

Notes

Only the left screw hole will align with the mounting bracket. One screw is sufficient to secure the cable, thanks to the built-in GPU lock.
KOLINK 1 model
ROCKET V2 1 recommendation
KXRORS/Shiny Snake/MiniNeo 1 model
S400 v2 1 recommendation
Lian Li 10 models
A4-H2O 1 recommendation
LANCOOL 216 1 recommendation
O11 DYNAMIC EVO 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

A vertical GPU mounting bracket is required for vertical installation.
O11 DYNAMIC EVO XL 4 recommendations
I/O facing up, cable routed in front of motherboard
Recommended Riser Cable 40cm Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SL-040BK-v4
I/O facing up, cable routed behind motherboard
Recommended Riser Cable 60cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-060BK-v4
I/O facing down, cable routed in front of motherboard
Recommended Riser Cable 50cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-050BK-v4
I/O facing down, cable routed behind motherboard
Recommended Riser Cable 70cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-070BK-v4
O11 DYNAMIC Mini V2 1 recommendation
O11 DYNAMIC XL 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

A vertical GPU mounting bracket is required for vertical installation.
O11 Vision 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

A vertical GPU mounting bracket is required for vertical installation.
Q58 1 recommendation
Recommended Riser Cable 24cm Single Reverse Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33VL-024BK-v4

Notes

Install the riser cable with the socket facing downward, then flip the socket upward to install the GPU.
SUP01 1 recommendation
VG4-4 Bracket 1 recommendation
LOUQE 2 models
GHOST S1 MKII 1 recommendation
RAW S1 1 recommendation
METALFISH 1 model
T60 1 recommendation
Midori 2 models
5L v2.2 1 recommendation
5L v2.3 1 recommendation
MSI 2 models
Maestro 700L P 1 recommendation
MAG Pano 100L PZ 1 recommendation
Nanoxia 1 model
Project S Mini 1 recommendation
NCASE 2 models
M2 1 recommendation
T1 (v2.5) 3 recommendations
Gen 4 Vertical Mount, 2 slot, 2.5 slot GPU
Recommended Riser Cable 19cm Double Reverse PCIe 5.0 Riser Cable
SKU AG-P5-33VV-019BK-v3
Gen 4 Vertical Mount, 3 slot GPU
Recommended Riser Cable 18cm Double Reverse PCIe 5.0 Riser Cable
SKU AG-P5-33VV-018BK-v3
Gen 5 Vertical Mount
Recommended Riser Cable N/A

Notes

Unfortunately, we do not currently offer a riser cable compatible with the NCASE T1 Gen 5 vertical mount.
Nuovolo 1 model
Nuovolo 1 recommendation
NZXT 2 models
H1 1 recommendation
Recommended Riser Cable 24cm Single Reverse Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33VL-024BK-v4

Additional Hardware

1x 13mm M3 hex nut standoffs
1x 13mm M3 screws

Notes

The screw holes will not align. A standoff, as listed above, is required to support the right side of the riser cable.
The original case screws secure the sides of the riser cable PCB rather than passing through its screw holes. See Installation Photo for reference.
Compatibility with the NZXT H1 V1 has not yet been verified, but the installation is expected to be similar.
Vertical GPU Mounting Kit 1 recommendation
Recommended Riser Cable 15cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-015BK-v4

Notes

Required for vertical GPU installation in the NZXT H5, NZXT H6, NZXT H7, and NZXT H9 series.
The screw holes will not align, but this is not required for installation. As long as the GPU is firmly secured to the mounting kit, the built-in GPU lock will keep the riser cable secured to the GPU. The riser cable can safely rest on the mounting kit's standoffs.
Okinos 1 model
Aqua 9 1 recommendation
PCCOOLER 1 model
CPS C3 T700 1 recommendation
Phanteks 12 models
Eclipse P500A 1 recommendation
Eclipse P600S 1 recommendation
Enthoo 719 2 recommendations
Enthoo Elite 1 recommendation
Enthoo Pro II 1 recommendation
Evolv Shift 2 1 recommendation
Evolv Shift Air 1 recommendation
Evolv Shift X 1 recommendation
Evolv X 1 recommendation
NV7 1 recommendation
Premium Vertical GPU Bracket 1 recommendation
Shift XT 1 recommendation
SilverStone 1 model
MILO 12 1 recommendation
Sliger 2 models
SM550 1 recommendation
SM580 1 recommendation
SSUPD 2 models
Meshlicious 1 recommendation
Meshroom S 3 recommendations
Streacom 1 model
DA6 XL 1 recommendation
Thermaltake 43 models
A500 1 recommendation
A700 1 recommendation
AH T600 1 recommendation
Commander series 1 recommendation
Core P1 1 recommendation
Core P3 1 recommendation
Core P3 Pro 1 recommendation
Core P5 1 recommendation
Core P6 1 recommendation
Core P8 1 recommendation
Core P90 1 recommendation
Core V71 1 recommendation
Core W100 1 recommendation
Core W200 1 recommendation
Core X31 1 recommendation
Core X71 1 recommendation
Core X9 1 recommendation
CTE C700 series 1 recommendation
CTE E550 TG 2 recommendations
Up Right Forward
Recommended Riser Cable 25cm Left Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SL-025BK-v4

Notes

Screws are not required for installation. The built-in GPU lock will keep the cable secured to the GPU
DistroCase 1 recommendation
Divider 200 TG 1 recommendation
Recommended Riser Cable 10cm Right Angle PCIe 5.0 Riser Cable
SKU AG-P5-33SR-010BK-v2
Divider 300 TG 1 recommendation
Divider 370 TG 1 recommendation
Divider 500 TG 1 recommendation
H550 1 recommendation
Level 20 1 recommendation
S250 1 recommendation
S300 1 recommendation
S500 1 recommendation
Suppressor F31 1 recommendation
Suppressor F51 1 recommendation
The Tower 600 series 1 recommendation
TR100 1 recommendation
V350 1 recommendation
View 27 1 recommendation
View 28 1 recommendation
View 300 1 recommendation
View 31 TG 1 recommendation
View 37 1 recommendation
View 390 1 recommendation
View 51 TG 1 recommendation
View 71 TG 1 recommendation
View 91 TG 1 recommendation
Thorzone 3 models
MJOLNIR 1 recommendation
NANOQ S 1 recommendation
NANOQ R 1 recommendation
XTIA 1 model
Xproto Mini 1 recommendation